Payment & Shipping Terms:
|Name:||Plate Frame Heat Exchanger||Area:||20㎡-60㎡|
|Caliber:||φ51-DN150||Sealing Gasket Type:||NBR Or EPDM,Q|
|Working Temperature:||-10℃-+150℃||Working Pressure:||0.6Mpa|
heat transfer plate heat exchanger,
plate type heat exchanger
Stainless Steel Plate Frame Heat Exchanger For Dairy / Brewage / Food
Frame The plates and compression plates are suspended from the upper load bar and are positioned by means of the lower guide rods which are fixed through the struts and are fitted with washers on the tensioning bolts for disassembly of the equipment, frames and columns with adjustable supports.
A device may include many heat exchangers, which are separated by connection boards with interchangeable connectors.
The front plate is used for meeting higher requirements in food processing. The combination of the high pressure depth, plate type and relatively few contacts make the running time longer and there will have no interruption. The diverging type can ensure that the liqud flows the whole plate. The end diameter enables it to carry out CIP cleaning with the same fluid it uses during the use.
he heat exchanging plate is provided withe the sealing gasket that is not bonded by glue.Users can carry out easy replacement operation of the sealing gasket even when the plate suspends inside the frame.
The plate type heat exchanger is composed of a group of corrugated metal plants. The holes on it form channel for liquids to flow, and the heat will be transferred between two kinds of liquids. The plates are assembled between a fixed frame board and a moveable clamping board and are tightened by the tightening bolts.
These plates are installed with sealing gaskets. The sealing gaskets play the sealing function on the channels between plates and make the liquids flow into adjacent channels. The quantity of plates aredetermined by flow, physical properties and temperature of liquids.
The joints can be located on the frame board and clamping board.
The frame and clamping board can be subjected to painting on the surface or coated by stainless steel. The movable nut on the fastening bolt is made of carbon steel and stainless steel.
Plate type BR-0.06,0.13,0.22,0.3,0.5,0.65 plate stainless steel AISl,316L,316,304
Sealing gasket type NBR or EPDM,Q Technical date Mechanical designed pressure/temperature Designed pressure 1.0Mpa Working pressure 0.6Mpa Working temperature-10℃-+150℃
Joint type DIN, SMS, ISO, male thread or others can be supplied according to requirements.
|Technical parameters / Specifications||Area||Caliber|
The plate type heat exchanger is provided with various flow combination types, which are all realized by adopting different reversal plates and different assembling methods. The flow combination is divided into single flow, multiple flow and mixed flow, which shall be selected according to the technological requirements. Generally, the medium with its temperature difference higher than 1.8 times the logarithmic average temperature difference should adopt he multiple flow, with an inter-plate flowrate of 0.3-0.5M/S; if the flow rate is too low, the double flow or multiple flow should be applied.
Contact Person: Miss. nicole